Fokoos Odin-5 F3

The Fokoos Odin-5 F3 is a tremendous printer that boasts features that printer enthusiasts typically spend extra on. This printer is an i3 Cartesian style that is essentially the consumer’s industry standard build area of 235mm (Y) x 235mm (X) x 250mm (Z). The glass build plate lends to great adhesion and a very flat surface. Set up was about the easiest I’ve ever experienced and I was fully assembled in no more than 10 minutes. The initial bed level need was almost non-existent, I’m not sure if I was lucky or if the Fokoos is just that good. The build of the machine is thoughtfully well designed. There’s no cables going a bunch of different places... in fact, they use an integrated ribbon cable to keep it all nice and clean. This is a massive selling point for me. Couple this with the volcano style V6 hot end and direct drive? Sign me up! The print quality of this machine is stellar, but with a caveat. Make sure you import the profile they have included on the SD card that came with the machine. In my video, I took the print speed to 140% and the Fokoos didn’t blink. This printer is just an impressive piece of machinery with a tremendous amount to offer. So long as you use their included profile, you’re going to be blown away by this machine!

You have successfully subscribed!